If you turn the system off while a
disc is playing, either with the
power/volume knob or by turning
off the ignition switch, the disc will
stay in the drive. When you turn the
system back on, the disc will begin
playing where it left off.
To remove the disc currently in play,
press the eject button. When a disc is
removed from a slot, the system
automatically begins the load
sequence so you can load another
disc in that position. If you do not
remove the disc from the changer
within 10 seconds, the disc will
reload into the slot. Then the system
returns to the previous mode (AM,
FM, or XM).
To remove a different disc from the
changer,firstselectitwiththe
appropriate preset button. When that
disc begins playing, press the eject
button. Continue pressing the eject
button to remove all the discs from
the changer.
For information on how to handle
and protect compact discs, see page
.
You can also eject discs when the
ignition switch is off. The disc that
was last selected is ejected first.
229
Protecting Discs
Playing Discs (Models without navigation system)
Removing Discs from the In-dash
Disc Changer
198
０７／０７／０９ ０９：４８：３１ ３１ＳＴＸ６１０ ０２０３
To Next Page
Loading...
Need help?
General
