If something electrical in your
vehicle stops working, the first thing
youshouldcheckforisablownfuse.
Determine from the chart on pages
, , and , or the diagram
on the fuse box lid, which fuse or
fuses control that device. Check
those fuses first, but check all the
fuses before deciding that a blown
fuse is the cause. Replace any blown
fuses, and check if the device works.
Remove the cover from the fuse
box.
Turn the ignition switch to the
LOCK (0) position. Make sure the
headlights and all other
accessories are off.
Check each of the large fuses in
the under-hood fuse boxes by
looking through the top at the wire
inside. Removing these fuses
requires a Phillips-head
screwdriver.
3.1.
2.
443 445444
Checking and Replacing Fuses
Fuses
440
BLOWN
BLOWN
FUSE
０７／０７／０９ １０：２２：００ ３１ＳＴＸ６１０ ０４４５
To Next Page
Loading...
Need help?
General
