3. Remove the Interior Protective Coverings
There are several protective coverings on the interior trim pieces and some areas of the carpet. Carefully remove all
interior protective coverings with clean hands to avoid soiling any surfaces. If the vehicle has a leather-wrapped steering
wheel, see the ServiceNews article “Removing the Protective Covering from a Leather-Wrapped Steering Wheel,”
posted in August 2017.
If any of the interior is dirty, clean it with mild soap or an Acura cleaning product such as Leather & Vinyl Cleaner (P/N
08700-9214A) or Carpet Spot Remover (P/N 08700-9215A). Clean real wood surfaces with a mild detergent and a soft,
damp cloth. Be sure to wipe off any excess liquid to avoid damaging the wood. Do not use other cleaning agents like
household detergents on this wood. These products could damage it.
4. Install the Floor Mats
Install the floor mats where they belong. Be sure to place the driver's floor mat eyelets over the anchors in the floor and
turn the knobs clockwise to the lock position. Also, do the same for the second-row floor mats. The anchors for those
mats are under the front seats.
5. Check the Battery
To ensure long battery life and that the client gets a fully charged battery, you must check it at these times:
• When the vehicle first arrives at the dealership
• During the TQI (if done at a later date)
• At regular intervals
• Just before vehicle delivery
If you plan to keep the vehicle in long-term storage, be sure to remove the No. 16 BACKUP MAIN (10 A) fuse.
Page 4 of 13
To Next Page
Loading...
Need help?
General
