105
uuIndicatorsuMulti-Information Display (MID) Warning and Information Messages
Continued
Message Condition Explanation
●
Appears when you attempt to put the transmission into
another gear position with the transmission in (P and
the engine OFF.
●
To select another gear position while in (P the engine
must be ON.
●
Appears when you try to change the gear position after
the position has automatically been changed to (P with
the driver’s door open and the driver’s seat belt
unfastened.
●
Press the (P button If you leave the vehicle.
●
Appears when the vehicle is stopped with the driver’s
seat belt unfastened and there is a chance that the
vehicle may roll unintentionally.
●
Press the (P button before release the brake pedal
when idling, parking or exiting the vehicle.
2 Shift Operation P. 474
●
Appears when the engine stops without the
transmission in (P, and does not restart automatically.
●
Appears if you open the hood while Auto Idle Stop
activates.
●
If you want to set the power mode to ON, put the
transmission into (P.
●
If you want to start the engine, follow the normal
procedure.
2 Starting the Engine P. 464
20 ACURA MDX-31TZ56600.book 105 ページ ２０１９年４月２４日 水曜日 午後５時４４分
To Next Page
Loading...
Need help?
General
