Acura MDX 2020 - Page 136

134
uuGauges and Multi-Information Display (MID)uMID
Instrument Panel
■
Example of customization settings
The steps for changing the “Trip A” Reset Timing setting to When Refueled are
shown below. The default setting for “Trip A” Reset Timing is Manually Reset.
1. Roll the multi-function steering-wheel
controls to select Vehicle Settings, then
push the multi-function steering-wheel
controls.
2. Roll the multi-function steering-wheel
controls until Meter Setup appears on the
display.
3. Push the multi-function steering-wheel
controls.
u Language Selection appears first on
the display.
20 ACURA MDX-31TZ56600.book 134 ページ ２０１９年４月２４日 水曜日 午後５時４４分