79
uuIndicatorsu
Continued
Indicator Name On/Blinking Explanation Message
Brake System
Indicator (Amber)
●
Comes on for a few seconds
when you set the power mode to
ON, then goes off.
●
Comes on if there is a problem
with a system related to braking
other than the conventional
brake system.
●
Comes on while driving - Have your vehicle
checked by a dealer.
●
With this indicator on, your vehicle still has
normal braking ability.
●
Comes on if there is a problem
with the automatic brake hold
system.
2 Automatic Brake Hold P. 533
20 ACURA MDX-31TZ56600.book 79 ページ 2019年4月24日 水曜日 午後5時44分