Acura MDX 2020 User Manual

82
uuIndicatorsu
Instrument Panel
Indicator Name On/Blinking Explanation Message
Low Oil Pressure
Indicator
●
Comes on when you set the
power mode to ON, and goes off
when the engine starts.
●
Comes on when the engine oil
pressure is low.
●
Comes on while driving - Immediately stop
in a safe place.
2 If the Low Oil Pressure Indicator Comes
On P. 656
Malfunction
Indicator Lamp
●
Comes on when you set the
power mode to ON, and goes off
either when the engine starts or
after several seconds if the
engine did not start. If “readiness
codes” have not been set, it
blinks five times before it goes
off.
●
Comes on if there is a problem
with the emissions control
systems.
●
Blinks when a misfire in the
engine’s cylinders is detected.
●
Readiness codes are part of the on board
diagnostics for the emissions control systems.
2 Testing of Readiness Codes P. 681
●
Comes on while driving - Have your vehicle
checked by a dealer.
●
Blinks while driving - Stop in a safe place
where there are no flammable objects. Stop
the engine for 10 minutes or more, and wait
for it to cool down. Then, take your vehicle to
a dealer.
2 If the Malfunction Indicator Lamp Comes
On or Blinks P. 657
Charging System
Indicator
●
Comes on when you set the
power mode to ON, and goes off
when the engine starts.
●
Comes on when the battery is
not charging.
●
Comes on while driving - Turn off the
climate control system and rear defogger in
order to reduce electricity consumption.
2 If the Charging System Indicator Comes
On P. 656
20 ACURA MDX-31TZ56600.book 82 ページ ２０１９年４月２４日 水曜日 午後５時４４分

Acura MDX 2020 Specifications

General

Brand	Acura
Model	MDX 2020
Category	Automobile
Language	English