The driver’s floor mat that came
with your vehicle hooks over the
floor mat anchor. This keeps the
floor mat from sliding forward and
possibly interfering with the pedals.
The plates on both the driver’s and
passenger’s floor mats should be
inserted between the rail motor and
seat rails underneath the seats.
If you remove the driver’s floor mat,
make sure to re-anchor it when you
putitbackinyourvehicle.
If you use non-Acura floor mats,
make sure they fit properly and that
theycanbeusedwiththefloormat
anchors. Do not put additional floor
mats on top of the anchored mats.
Twice a year, clean the antenna mast
with a dry cloth and mild detergent.
Scrubtheantennainupwardstrokes
to avoid bending it. Rinse with water.
Make sure the antenna works
smoothlybyturningthestereooff
andonseveraltimeswiththe
ignition switch ON (II). The antenna
does not need lubricating.
If you use a ‘‘drive-through’’ car wash,
make sure you turn the stereo off
first. This retracts the antenna and
prevents the car wash brushes from
bending or breaking it.
Floor Mats Power Antenna
Floor Mats, Power Antenna
Maintenance
159
PLATE
RAIL MOTOR
PLATEFLOOR MAT
０４／０８／１２ １６：３７：４７ ３１ＳＷ０６４０ ０１６２
To Next Page
Loading...
