Air conditioning, as it cools, removes
moisture from the air. When used in
combination with the heater, it
makes the interior warm and dry.
This setting is suitable for all driving
conditions whenever the outside
temperature is above 32°F (0°C).
To remove fog from the inside of the
windows: Select . The system
automatically switches to fresh air
mode and turns on the A/C.
Select .
Set the fan and temperature
controls to maximum level.
For your safety, make sure you have
a clear view through all the windows
before driving.
Set the fan to the desired speed, or
high for faster defrosting.
Select . The system
automatically switches to fresh air
mode and turns on the A/C.
Adjust the temperature so the
airflow feels warm.
Select to help clear the
rear window.
To increase airflow to the
windshield, close the corner vents.
When you switch to another mode
from , the A/C setting
returns to the previous setting (on or
off). Select A/C, then press ENTER
on the interface selector to turn the
A/C off if it is on.
To clear the windshield faster, you
can close the dashboard corner vents
by rotating the wheel next it. This
sends more warm air to the
windshield defroster vents. Once the
windshield is clear, select the fresh
air mode to avoid fogging the
windows.
Switch the fan on.
Turn on the air conditioning.
Select and fresh air mode.
Adjust the temperature to your
preference.
1.
2.
3.
4.
1.
2.
3.
1.
2.
3.
4.
5.
Dehumidify the Interior To Defog and Def rost To Remove Exterior Frost or Ice
From the Windows
Vents, Heating, and A/C, Climate Control
168
Table of ContentsTable of Contents
To Next Page
Loading...
Need help?
General
