A child seat with a tether can be
installed in any seating position in
the back seat, using one of the
anchorage points shown above.
Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required or
available.
After properly securing the child
seat with the lap/shoulder belt
(see page ), pivot the head
restraint down (see page ) and
route the tether strap over the
head restraint.
Lift the anchor cover, then attach
the tether strap hook to the
anchor, making sure the strap is
not twisted.
Tighten the strap according to the
seat maker’s instructions.
1.
2.
3.
47
120
Installing a Child Seat
Installing a Child Seat with a
Tether
Using the Tether Anchor
Driver and Passenger Safety
49
COVER
TETHER STRAP
HOOK
ANCHOR
ANCHOR
TETHER ANCHORAGE POINTS
To Next Page
Loading...
Need help?
General
