TheHFLisoperatedbytheHFL
Talk and Back buttons on the left
side of the steering wheel. The next
few pages provide instructions for all
basic features of the HFL.
To hear a list of available options
at any time, press the Talk button,
wait for the beep, and say, ‘‘Hands
free link help.’’
Many commands can be spoken
together. For example, you can
say, ‘‘Dial 123-456-7891.’’
To enter a string of numbers in a
Call or Dial command, you can say
them all at once, or you can
separate them in blocks of 3, 4, 7,
10, or 11.
To skip a voice prompt, press the
Talk button while the HFL is
speaking. The HFL will then begin
listening for your next command.
Here are some guidelines for using
voice control:
To enter a command, press the
Talk button. Then, after the beep,
say your command in a clear,
natural tone.
For best system operation, set the
climate control fan speed to low,
and direct the center vents away
from the microphone in the ceiling.
If the HFL does not recognize a
command, its response is, ‘‘Pardon.’’
If it doesn’t recognize the
command a second time, its
response is, ‘‘Please repeat.’’ If it
doesn’t recognize the command a
third time, it plays the Help
prompt.
All phones may not
operate identically, and some may
cause inconsistent operation of the
HFL.
How to Use the HFL Using Voice Control
HandsFreeLink
Features
233
NOTE:
TM
Table of ContentsTable of Contents
To Next Page
Loading...
Need help?
General
