▲
▼
▲▼
Each time you press the INFO ( /
) button, the display changes as
shown in the illustration.
Here are the settings you can
customize in this mode:
DOOR UNLOCK MODE
KEYLESS ACCESS
LIGHT FLASH
KEYLESS ACCESS BEEP
If you select EXIT and press the
SEL/RESET button, the
CUSTOMIZE GROUP screen is
shown again.
With the ignition switch in the ON
(II) position, press the INFO button
for more than 3 seconds, then
release it. The CUSTOMIZE ENTRY
screen appears on the multi-
information display.
Select CHG SETTING, and press the
SEL/RESET button.
Select KEYLESS ACCESS SETUP,
and press the SEL/RESET button.
Multi-Information Display
KEYLESS ACCESS Setup
88
Press the or button.
Press the SEL/RESET button.
To Next Page
Loading...
