▲▼
▲▼
Each time you press the or
button, the screen changes as shown
in the illustration.
Here are the settings you can
customize in this mode:
INTERIOR LIGHT
DIMMING TIME
HEADLIGHT AUTO OFF TIMER
AUTO LIGHT SENSITIVITY
If you select EXIT and press the
SEL/RESET button, the
CUSTOMIZE GROUP screen is
shown again.
With the ignition switch in the ON
(II) position, press the INFO button
for more than 3 seconds, then
release it. The CUSTOMIZE ENTRY
screen appears on the multi-
information display.
Select CHG SETTING, and press the
SEL/RESET button.
Select LIGHTING SETUP, and press
the SEL/RESET button.
CONTINUED
Lighting Setup
Multi-Information Display
Instruments and Controls
91
Press the or button.
Press the SEL/RESET button.
To Next Page
Loading...
