10
BURNER CHARACTERISTICS
DESCRIPTION OF THE BURNER
This new generation of oil-fired burners meets current requirements
for the performance and cleanliness of combustion gases.
The burner is made from top quality components using the latest
technologies, and includes a fuel oil preheating device.
Components:
• “Landis & Gyr” relay
• “A.E.G.” motor
• “Suntec” pump
• “May & Christe” transformer
• “Danfoss” oil preheating device
Advantages
• Easy to install, fitted with a safety shut-off and a new burner
suspension system.
• A special tool supplied with the burner is used for all maintenance
work.
• The burner air pressure adapts to the combustion chamber
pressure.
• An automatic check valve stops the air flow when the burner
stops, and thus prevents the boiler cooling down.
• Quiet and very reliable.
• Adapts to the depth of the boiler via the adjustable flange on the
throat.
• Three air adjustment points to ensure optimum air/oil mixture.
- Presetting of the upstream air;
- Primary adjustment;
- Combustion head adjustment.
Burner reset
Motor capacitor
High voltage transformer
Pump/nozzle connection pipe
Throat
Nozzle line adjustment screw
Air damper
Solenoid valve
Motor
Fuel oil pump
Control relay
Burner inlet
To Next Page
Loading...
