To Next PageTo Next Page
Need help?Do you have a question about the Ada Vertical and is the answer not in the manual?
General| Type | Laser Level |
|---|---|
| Laser diode | 635 nm, <1mW |
| Operating temperature | -10°C to +40°C |
| Weight | 0.5 kg |
| Laser class | Class 2 |
Procedure for inserting the correct batteries into the instrument for operation.
Instructions for securely mounting the instrument onto a tripod for stable use.
Steps for leveling the instrument using circular and tubular levels for accurate measurements.
Guide on how to switch on the instrument and adjust laser brightness.
Specific preparations required before performing vertical measurements.
Performing standard vertical measurements using the instrument's optical and laser features.
Techniques for taking measurements in wells or shafts for surveying purposes.
Procedure to ensure the tubular level is accurately aligned perpendicular to the instrument's axis.
Adjusting the circular level for proper horizontal orientation after tubular level calibration.
Steps to correct collimation errors by adjusting the reticule for precise alignment.
Aligning the laser spot with the reticule center for accurate vertical projection.
