Adafruit UDA1334A - Page 40

For Feather M0 Express, ItsyBitsy M0 Express and
Metro M0 Express:
Connect VIN on the breakout to 3V/3.3 on the
board.
Connect GND on the breakout to G/GND on the
board.
Connect BCLK on the breakout to D1/TX on the
board.
Connect WSEL on the breakout to D0/RX on the
board.
Connect DIN on the breakout to D9 on the board.
© Adafruit Industries https://learn.adafruit.com/adafruit-i2s-stereo-decoder-uda1334a Page 40 of 45