Overview
This fully-featured UDA1334A I2S Stereo DAC breakout is a perfect match for any I2S-output audio interface. It's
affordable but sounds great! The NXP UDA1334A is a jack-of-all-I2S-trades: you can use 3.3V - 5V logic levels (a rarity),
and can process multiple different formats by setting two pins to high or low. The DAC will process data immediately,
and give you a clear, analog, stereo line level output. It's even cool with MCLK-less I2S interfaces such as the
Raspberry Pi (which it's ideal for) - a built in PLL will generate the proper clock from the incoming signal.
To Next Page
Loading...