.Select a channel
When selecting "MIDI S1" mode or "MIDI S2" mode, the MIDI transmission is enabled
automatically , and use the [+] and [-] buttons or the number buttons to select the MIDI channel
(0-16) for which you want to specify a new transmission.
When selecting "MIDI R1" (remote) mode, using the [+] and [-] buttons
or the number buttons to select the MIDI channel (0-15) for which you
want to specify a new reception mode
Press [+] or [-] button, the message appeared will change between "MIDI R0" (Recepition
OFF), "MIDI R1" (Multi), MIDI S0 (Transmission OFF), MIDI S1(Selecting Main voice Ch),
MIDI S2 (Selecting Split Voice Ch), MIDI S3 (Selecting Dual Voice Ch). You can Select your
desired Mode.and then press [ENTER]button to assure your selecting.
.MIDI Reception and Transmission
Your instrument allows 2 reception modes.
Mode "0" RX OFF : Reception disabled.
Mode "1" MULTI : Received MIDI note data directly controls the instrument tone
generator. Different voices con be played on different channels.
This instrument also allows independent MIDI transmit channels to be assigned to the
left split voices and the right main voices. It's also possible to turn MIDI output off.
..Press [FUNCTION] button to select "MIDI R0?" function
..Press [+] or [-] button to select the Desired Mode
DIGITAL PIANO
To Next Page
Loading...
Need help?
General
