Adam,Rouilly AR403 - During Use; Ophthalmoscope Use; Sleep Mode

11
5
6a
6b
An ophthalmoscope (not included) may be used to view each condion.
The model has an automac sleep mode which turns o all displays to
conserve power.
This is funconal if either baery power or mains power is used.
Aer a period of approximately 8 minutes of no new condions being
selected, the main internal display and LED condion number indicators will
switch o.
The green power indicator light on the power switch will ash, indicang that
sleep mode is operaonal.
To wake, simply press any Up (+) or Down(-) Buon once.
Aer a short delay, both LED condion number indicator displays will
show a “ ” and then resume to the numbers of the condions which were last
selected for each eye.
The model is ready for use again.
Ophthalmoscope Use
During sleep mode, the last condions selected on each eye are stored.
For best clarity of display of the condions, we recommend seng the
ophthalmoscope light to “o”.
Sleep Mode