Need help?Do you have a question about the Adam CPWplus 200 and is the answer not in the manual?
Lists items included with each scale model for setup.
Guidelines for optimal placement of the scale to ensure accuracy.
Step-by-step guide for setting up the standard CPWplus scale.
Instructions for setting up CPWplus M and L series scales.
Procedure for powering the scale on and off correctly.
How to set the scale to zero before weighing.
Steps to subtract the weight of a container.
How to switch between different weighing units (kg, lb, etc.).
Basic procedure for placing items and getting weight readings.
Accessing and navigating user-configurable scale settings.
Configuring the automatic power-off function.
Adjusting the LCD backlight behavior.
Selecting which weighing units are available for use.
Setting the RS-232 communication address or ID.
Configuring the data transmission speed for RS-232.
Setting RS-232 data bits and parity for communication.
Choosing how data is transmitted via RS-232.
Configuring the scale's hold function behavior.
Defining the duration for the hold function.
Adjusting scale parameters for accuracy and speed.
Setting the speed of the display filter for stable readings.
Adjusting the range for automatic zero point correction.
Setting the range for the stability indicator.
Adjusting the tracking range for scale stability.
Access to critical calibration data, protected by a PIN.
General| Capacity | 200g |
|---|---|
| Readability | 0.01g |
| Pan Size | 120mm diameter |
| Calibration | External calibration |
| Display | Backlit LCD |
| Material | Stainless steel pan |
| Auto Power Off | Yes |
| Overload Protection | Yes |
| Units of Measurement | g, oz |
To Next Page
