Need help?Do you have a question about the Adam CPWplus 150 and is the answer not in the manual?
Lists the items included with the scale for unpacking.
Provides guidance on ideal placement for scale accuracy and performance.
Step-by-step instructions for setting up standard CPWplus scales.
Specific setup instructions for CPWplus M and L models.
Instructions on turning the scale on and off.
Explains how to set the scale to zero and re-zero.
Procedure for taring the scale to exclude container weight.
How to change the weighing unit (kg, lb, oz).
Basic operation for placing items and reading weight.
Accessing and modifying user-defined scale settings.
Setting the auto power off feature to conserve battery life.
Configuring the LCD backlight for different modes.
Controlling which weighing units are selectable.
Setting the RS-232 communication ID.
Configuring RS-232 transmission speed.
Setting RS-232 communication parameters.
Choosing RS-232 data output mode.
Configuring the hold feature for weighing results.
Defining the duration for which the hold display is active.
Adjusting scale performance settings like filter and stabilization.
Setting the speed of the display filter for different weighing conditions.
Adjusting the range of zero tracking to maintain zero stability.
Setting the range for the stability indicator and automatic printing.
Adjusting the tracking range to indicate scale stability.
Critical calibration information protected by a PIN code for technicians.
To Next Page
General
