13.1.1 AUTO POWER OFF
• The first parameter is to set the auto power off function. The
display will show “Pr oFF” (DEFAULT SET).
• Press [Tare/Zero] to toggle between “Pr on” and “Pr oFF”.
Enables the Auto Power Off function.
The power will be turned off after 2
minutes if a key has not been
pressed for 2 minutes and the scale
is at zero. If there is any weight on
the scale or a key is pressed, the
scale will continue to work.
Disables the Auto Power Off function.
The scale will not automatically turn
off.
• Press the [Unit] key to confirm the selection and move to the
next parameter.
13.1.2 SETTING OF BACKLIGHT
• The second parameter to set the backlight function. Display
will show “bL 3” (DEFAULT SET).
• Press the [Tare/Zero] key to change the settings
Off- backlight is switched off always
On- backlight is set to on always
Automatic- backlight will be off unless a
weight is placed on the pan. When the
weight is removed it will stay on for 10
seconds after the scale returns to zero.
• Press the [Unit] key to confirm the selection and move to the
next parameter.
© Adam Equipment Company 2008
17
To Next Page
Loading...
Need help?
General
