8 H200 MANUAL [ENGLISH] 9H200 MANUAL [ENGLISH]
→ Make sure to position the H200 correctly on your head by checking the L (left) and
R (right) markings in the earcups.
→ Pull both ear cups down until they rest comfortably over your ears.
4. USING THE H200 5. REPLACING THE EARPADS
→ For hygiene reasons and because padding materials naturally degrade over
time, earpads and the headband padding should be replaced occasionally. For
headphones undergoing heavy use we recommend once a year, for medium and
lighter use, once every two years is sufficient.
→ To remove the earpads, simply pull firmly from the middle of the cushion until it has
detached fully from the earcup.
→ To replace the earpad, place it onto the earcup and start to slowly work the outer edge
of the earpad into the groove.
→ Hold the earpad and earcup with one hand and run your other index finger along the
inside in a circle to attach the new earpad. Rotate until the letters align with the yoke.
To Next Page
Loading...