Adaptec RAID 1220SA - Installing on an Existing Operating System

Chapter 5: Getting Started l37
1 Install and connect your controller and internal disk drives (see page 26).
If your controller has an external connector, you can also connect external disk drives, if
required.
2 Install the controller driver (see page 47).
3 Install Adaptec Storage Manager and begin to manage your data storage (see page 50).
Installing on an Existing Operating System
1 Install and connect your controller and internal disk drives (see page 26).
If your controller has an external connector, you can connect external disk drives as well
(or instead).
2 Install the controller driver (see page 47).
3 Install Adaptec Storage Manager and begin to manage your data storage (see page 50).