Need help?Do you have a question about the Adata XM13 and is the answer not in the manual?
Guides users on how to access the system's BIOS setup menu to prepare for SSD configuration.
Instructs users to set the PCH SATA control mode to RAID (XHD) within the BIOS for optimal performance.
Details the process of installing the operating system and necessary drivers, including Intel Rapid Storage Utility.
Provides instructions for installing the Intel Rapid Storage Technology software on the system.
Instructs users to properly shut down the computer before proceeding with hardware installation.
Guides the physical installation of the ADATA XM13 SSD into the mSATA slot on the motherboard.
Details how to boot the computer into the installed operating system after hardware changes.
Explains how to launch the Intel Rapid Storage Technology (ISRT) software via the taskbar icon.
Instructs users to click the 'Enable acceleration' option within the ISRT interface.
Guides selection of acceleration mode (Enhanced or Maximized) and confirmation in ISRT.
Shows how the ISRT interface updates to display the new acceleration setup in the Acceleration View.
Confirms that the system has been successfully configured with Intel Smart Response Technology.
To Next Page
General
