What to do if the ADC EcoWash EWS-80 M2 displays 'PWR FAUL UAIT'?
This message shows after a power outage. If the power was cut during the spin cycle, 'WAIT' is also displayed. To resolve this, press START to continue the program from where it stopped or press ESC to end the program.
What does error E2 mean on my ADC EcoWash Dryer and how do I fix it?
The error message E2 indicates that the door could not be unlocked at the end of the program or that it unlocked during the program. Press ESC to end the program.
What to do if my ADC EcoWash EWS-80 M2 Dryer displays error E3?
The error message E3 appears when the water level inside the drum has not decreased within a specified time, even after deactivating the emptying valve output. You can press START to continue the program, or press ESC to end the program.
What should I do if my ADC EcoWash EWS-80 M2 shows error E4?
The error message E4 appears when the water level inside the tub has not increased within a certain time, despite activating the solenoid valves. You can press START to continue the program or press ESC to end it.
What does error E5 mean on my ADC EcoWash EWS-80 M2 Dryer?
The error message E5 indicates that the water temperature has not increased within a specified time, even after activating the heating output. Press START to continue the program, or press ESC to end the program.
What does error E6 mean on my ADC EcoWash Dryer?
The error message E6 is displayed when the water temperature has exceeded 95 ºC. Press START to continue the program or press ESC to end it.
What does error E7 mean on my ADC EcoWash EWS-80 M2?
The error message E7 means that the water temperature exceeds 203ºF. Press START to continue the program or press ESC to end it.
What does error E9 mean on my ADC EcoWash EWS-80 M2?
The error message E9 appears when the thermal protection of the washer extractor motor is detected to have not been activated. Press START to continue the program or press ESC to end it.
What does error E10 mean on my ADC EcoWash Dryer?
The error message E10 appears when the final spin activates the unbalance micro three times. Press ESC to end the program.
What does error E11 mean on my ADC EcoWash EWS-80 M2?
The error message E11 is displayed when a program finishes, but the water temperature inside the tub exceeds 122ºF. Press ESC to end the program.
Comprehensive safety guidelines and operational advice for using the appliance.
Instructions to access the configuration menu using INC/DEC keys and START.
Sets program prices, only available in Coin Mode.
Adjusts water levels to Low, Intermediate, or High.
Modifies wash cycle length for programs P1-P4.
Modifies cycle length for extended programs P5 and P6.
Allows modification of OPL programs: soak, time, temperature, and spin speed.
Selects currency for Coin Mode, lists available currencies and codes.
Allows changing the machine operating mode between CP, Coin, and OPL.
Guidance for troubleshooting electrical and mechanical issues.
List of error messages and their recommended actions.
General| Brand | ADC EcoWash |
|---|---|
| Model | EWS-80 M2 |
| Category | Dryer |
| Language | English |
To Next Page