What to do if the ADC EcoWash EWH-40 M2 displays 'PWR FAUL UAIT'?
This message shows after a power outage. If the power was cut during the spin cycle, 'WAIT' is also displayed. To resolve this, press START to continue the program from where it stopped or press ESC to end the program.
What does error E2 mean on my ADC EcoWash EWH-40 M2 Dryer and how do I fix it?
The error message E2 indicates that the door could not be unlocked at the end of the program or that it unlocked during the program. Press ESC to end the program.
What to do if my ADC EcoWash EWH-40 M2 Dryer displays error E3?
The error message E3 appears when the water level inside the drum has not decreased within a specified time, even after deactivating the emptying valve output. You can press START to continue the program, or press ESC to end the program.
What should I do if my ADC EcoWash EWH-40 M2 Dryer shows error E4?
The error message E4 appears when the water level inside the tub has not increased within a certain time, despite activating the solenoid valves. You can press START to continue the program or press ESC to end it.
What does error E5 mean on my ADC EcoWash EWH-40 M2 Dryer?
The error message E5 indicates that the water temperature has not increased within a specified time, even after activating the heating output. Press START to continue the program, or press ESC to end the program.
What does error E6 mean on my ADC EcoWash Dryer?
The error message E6 is displayed when the water temperature has exceeded 95 ºC. Press START to continue the program or press ESC to end it.
What does error E7 mean on my ADC EcoWash EWH-40 M2?
The error message E7 means that the water temperature exceeds 203ºF. Press START to continue the program or press ESC to end it.
What does error E9 mean on my ADC EcoWash EWH-40 M2 Dryer?
The error message E9 appears when the thermal protection of the washer extractor motor is detected to have not been activated. Press START to continue the program or press ESC to end it.
What does error E10 mean on my ADC EcoWash EWH-40 M2?
The error message E10 appears when the final spin activates the unbalance micro three times. Press ESC to end the program.
What does error E11 mean on my ADC EcoWash EWH-40 M2 Dryer?
The error message E11 is displayed when a program finishes, but the water temperature inside the tub exceeds 122ºF. Press ESC to end the program.
Important safety warnings regarding flammable vapors and liquids.
Description of the washer's control panel buttons and their functions.
Explanation of the safety feature to stop the washer at any time.
Setting prices for each program in Coin Mode.
Customizing OPL programs, including soak, temp, and spin.
Setting the grace period for the cycle stop function.
Viewing and controlling machine inputs and outputs.
Displaying the last ten error codes encountered.
Common issues and checks before contacting service.
Explanation of error codes and their corresponding actions.
General| Brand | ADC EcoWash |
|---|---|
| Model | EWH-40 M2 |
| Category | Dryer |
| Language | English |
To Next Page