What does error E12 mean on my ADC EcoWash EWH-40 M2?
The error message E12 means that a program has finished, but there is still water inside the tub. The door cannot be opened until the water is drained. Press ESC to end the program.
Why is my ADC EcoWash EWH-40 M2 not getting enough water?
If the washer extractor isn't getting enough water, check the following: 1. Ensure that the water mains tap is open. 2. Check that the water inlet filter isn't blocked. 3. Verify that the water pressure is between 2 and 4 kg/cm[2] (28 and 56 psi).
Important safety warnings regarding flammable vapors and liquids.
Description of the washer's control panel buttons and their functions.
Explanation of the safety feature to stop the washer at any time.
Setting prices for each program in Coin Mode.
Customizing OPL programs, including soak, temp, and spin.
Setting the grace period for the cycle stop function.
Viewing and controlling machine inputs and outputs.
Displaying the last ten error codes encountered.
Common issues and checks before contacting service.
Explanation of error codes and their corresponding actions.
General| Brand | ADC EcoWash |
|---|---|
| Model | EWH-40 M2 |
| Category | Dryer |
| Language | English |
To Next Page