ADC EcoWash ECOWASH-M2

Questions and Answers

A
Audrey MedinaAug 18, 2025
What to do if the ADC EcoWash Dryer displays 'PWR FAUL UAIT'?
- G
  Garrett FitzgeraldAug 18, 2025
  This message shows after a power outage. If the power was cut during the spin cycle, 'WAIT' is also displayed. To resolve this, press START to continue the program from where it stopped or press ESC to end the program.
K
Kimberly ValenzuelaAug 20, 2025
What does error E2 mean on my ADC EcoWash ECOWASH-M2 Dryer and how do I fix it?
- H
  Howard FlowersAug 20, 2025
  The error message E2 indicates that the door could not be unlocked at the end of the program or that it unlocked during the program. Press ESC to end the program.
S
Sandra BrownAug 23, 2025
What to do if my ADC EcoWash ECOWASH-M2 Dryer displays error E3?
- D
  Debra HernandezAug 23, 2025
  The error message E3 appears when the water level inside the drum has not decreased within a specified time, even after deactivating the emptying valve output. You can press START to continue the program, or press ESC to end the program.
A
alindseyAug 26, 2025
What should I do if my ADC EcoWash ECOWASH-M2 Dryer shows error E4?
- J
  James FreemanAug 26, 2025
  The error message E4 appears when the water level inside the tub has not increased within a certain time, despite activating the solenoid valves. You can press START to continue the program or press ESC to end it.
R
Richard SmithAug 27, 2025
What does error E5 mean on my ADC EcoWash ECOWASH-M2 Dryer?
- N
  Nichole LambAug 28, 2025
  The error message E5 indicates that the water temperature has not increased within a specified time, even after activating the heating output. Press START to continue the program, or press ESC to end the program.
L
Linda ConradAug 30, 2025
What does error E6 mean on my ADC EcoWash ECOWASH-M2?
- M
  Mrs. Alison IngramAug 30, 2025
  The error message E6 is displayed when the water temperature has exceeded 95 ºC. Press START to continue the program or press ESC to end it.
J
Jeffrey DavisSep 2, 2025
What does error E7 mean on my ADC EcoWash Dryer?
- A
  aaron53Sep 2, 2025
  The error message E7 means that the water temperature exceeds 203ºF. Press START to continue the program or press ESC to end it.
S
Stacy GonzalezSep 4, 2025
What does error E9 mean on my ADC EcoWash Dryer?
- W
  Wesley CollinsSep 4, 2025
  The error message E9 appears when the thermal protection of the washer extractor motor is detected to have not been activated. Press START to continue the program or press ESC to end it.
W
William ChavezSep 7, 2025
What does error E10 mean on my ADC EcoWash Dryer?
- A
  Ann PrinceSep 7, 2025
  The error message E10 appears when the final spin activates the unbalance micro three times. Press ESC to end the program.
K
Kathy PhamSep 9, 2025
What does error E11 mean on my ADC EcoWash ECOWASH-M2?
- D
  Daniel HardySep 9, 2025
  The error message E11 is displayed when a program finishes, but the water temperature inside the tub exceeds 122ºF. Press ESC to end the program.