What does error E12 mean on my ADC EcoWash Dryer?
The error message E12 means that a program has finished, but there is still water inside the tub. The door cannot be opened until the water is drained. Press ESC to end the program.
Why is my ADC EcoWash ECOWASH-M2 not getting enough water?
If the washer extractor isn't getting enough water, check the following: 1. Ensure that the water mains tap is open. 2. Check that the water inlet filter isn't blocked. 3. Verify that the water pressure is between 2 and 4 kg/cm[2] (28 and 56 psi).
Crucial safety advice for users regarding appliance operation.
Comprehensive instructions to prevent hazards and ensure safe appliance usage.
Explanation of the control panel, buttons, and indicators.
Overview of available wash programs and their functions.
How to safely stop and manage wash cycles.
Step-by-step guide to starting and completing a wash program.
Details on Coin, CP, and Pay Center operational configurations.
How to switch between OPL, Coin, and CP modes.
Navigating the machine's configuration settings.
Configuring currency and pricing for coin-operated machines.
Adjusting time, temperature, advance, beep, and grace period settings.
Basic troubleshooting steps for common machine issues.
Understanding error codes and recommended actions.
General| Brand | ADC EcoWash |
|---|---|
| Model | ECOWASH-M2 |
| Category | Dryer |
| Language | English |
To Next Page