EasyManua.ls Logo

ADC Adtemp 433 - Using the Thermometer; 4 A. Controls and Features; 4 B. LCD Screen;Display

ADC Adtemp 433
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Caution: If measuring human forehead temperature, select "body" mode; for measur-
ing objects, select "surface" mode.
Caution: Do not store or use near strong electrostatic or strong magnetic fields.
Caution: This product is intended for use as a screening tool in the home, in small
commercial or industrial settings (e.g., offices, factories, warehouses, restaurants,
retails shops, movie theaters) and in medical settings.
Caution: Avoid taking temperature measurements for at least 30 minutes after physical
activity, bathing, swimming, consuming food or beverages, or spending time outdoors.
Caution: If using for high-volume, rapid mass screenings, it is recommended that the
unit be allowed to rest for up to 30 seconds every 5 to 10 measurements so that the IR
temperature sensor can reset and stabilize.
4. USING THE THERMOMETER
4a. Controls and Features
7
1. IR sensor
2. Liquid crystal display (LCD)
3. MODE button
4. Down Arrow button
5. Up Arrow button
6. SET button
7. On/Measure button
8. Battery cover
9. Surface mode
10. Body mode
11. Data indicator
12. Indicator of measurement result
13. Low-battery indicator
14. Volume on/off indicator
15. Fahrenheit
16. Memory number
17. Celsius
18. Memory indicator
4b. LCD Screen/Display

Other manuals for ADC Adtemp 433

Related product manuals