Why is my ADC Thermometer not turning on?
If your ADC Thermometer won't turn on, the display is blank, or the power is off, try the following: 1. Press the ON button again. 2. Check to ensure the battery is installed with the correct polarity. 3. Replace the batteries with new ones.
What to do if my ADC Adtemp 433 Thermometer shows a low battery?
If your ADC Thermometer shows a low battery indication, replace the battery with a new one.
What to do if ADC Thermometer shows an operating temperature error?
If your ADC Thermometer displays an error related to operating temperature, move to a room within the specified operating temperature range and wait 30 minutes before taking the temperature again.
Why does the screen on my ADC Adtemp 433 Thermometer flicker and turn off?
If the screen of your ADC Thermometer flickered and automatically turned off, replace the battery. If the issue persists, the product may be damaged and require repair.
What to do if my ADC Adtemp 433 Thermometer gives an unusual temperature reading?
If the temperature reading from your ADC Thermometer is not within the typical human temperature range, take the measurement again.
What to do if ambient temperature changes too fast when using ADC Adtemp 433?
If the ambient temperature is changing too fast, wait until the ambient temperature is stable before using the ADC Thermometer.
What to do if I measured too far from the patient with ADC Adtemp 433 Thermometer?
If you measured over the distance 2-5.9 in (5-15 cm), move closer to the patient when using the ADC Thermometer.
General| Brand | ADC |
|---|---|
| Model | Adtemp 433 |
| Category | Thermometer |
| Language | English |
Highlights crucial warnings regarding product use, accuracy, child safety, and disposal.
Step-by-step instructions for turning on, positioning, and taking a temperature measurement.
Lists common display codes, their situations, and recommended solutions.
Guidance on how to replace the thermometer's batteries, including polarity and type.
Instructions for cleaning and disinfecting the thermometer using approved agents.
Details measurement units, ranges, accuracy, and display resolution.
To Next Page
