10
6. Memory Function
The unit retains the last 50 readings. The newest reading will occupy
memory cell 1, the oldest, memory cell 50.
To recall previous readings:
1. With the power off, press the up "
▲
" or down "
▼
" button to
view the history of measured values. The display will indicate whether
the reading was a body or surface temperature measurement.
2. An empty memory cell shows “---°C” or “---°F”.
Note:
Once 50 measurements are in memory each new measurement
will overwrite the oldest.
To delete readings from memory:
1. With the power on, press and hold the up "
▲
" or down "
▼
" button
multifunction key until the display shows "CLR." The device will sound a
long beep, which means that all stored temperature readings have been
cleared.
Note:
All readings (body and surface) will be cleared when deleting
readings from memory.
7. Adjustable Settings
The Adtemp 433 has three adjustable settings:
F1 Temperature Scale F/C
1. With the instrument on, press and hold the SET button until the display
reads F1.
To Next Page
Loading...
