11
2. Press the up "
▲
" or down "
▼
" button to move between Celsius
and Fahrenheit scale.
3. Press the SET button to confirm the new setting.
Please note: The factory default is Fahrenheit.
F2 Fever-Alert Threshold
The fever-alert threshold is the temperature at which the backlit display
color turns red. The default fever alert is 100.6°F (38.1°C).
To change the threshold:
1. With the instrument on, press the
SET
button twice (until the display reads F2).
2.
Press the down “
▼
” button to decrease by 0.2° F. Press the up "
▲
"
button to
increase 0.2° F.
3.
Press the SET button to save.
F3
Silent Mode
Silent mode will keep the unit from beeping.
To turn silent mode on or off:
1. With the instrument on, press and hold the SET three times until the display
reads F3.
2.
Press the down “
▼
” button or up "
▲
" button to toggle between on or off.
3.
Once the desired mode is selected, press the
SET
button to save.
Factory Reset:
Adjustable settings can be cleared by performing a factory
reset. With the unit on, press and hold the
MODE
button until
RES
appears
in the display. This will also clear any saved readings from memory.
To Next Page
Loading...
