ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance
2-127
© 2000, ADC Telecommunications, Inc.
DLP-538
Page 2 of 2
4. Assign the selections by pressing Enter or Return. If Reset is selected, a pop-up appears as
shown below:
Press Y for yes or N for no.
Stop! You have completed this procedure.
RESET / LED TEST
Low Speed Units (Group-Slot)
=======================================================
M M 1 - 2 - 3 - 4 - 5 - 6 - 7 -
X X ------- ------- ------- ------- ------- ------- -------
W P 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4
=== ======= ======= ======= ======= ======= ======= ======= =
. R R . . . .
(Legend: L = Perform LED Test, R = Execute Unit Reset)
Press CONTROL-A For Assistance
6664-D
M
P
U
Figure 538-1. Reset/LED Test Screen
Are You Sure? (y/n)
To Next Page
Loading...