ADCMT 6247G - Connections for Calibration

6247G/6247C DC Voltage Current Source/Monitor Operation Manual
8.3 Connections
8-3
8.3 Connections
The following figure shows connections for calibrating the 6247G/6247C using a DMM.
Figure 8-1 Connections for Calibration
(c) Checking and calibrating current source measurement (30 A to 300 mA range)
DMM
6247G/C
(a) Checking and calibrating voltage source measurement
(b) Checking and calibrating current source measurement (3 A range)
DMM
DMM
6247G/C
6247G/C
A01035, etc.
(Blue) ( Red ) (Black) (Red)
(Black)
(Blue)