ADDAC SYSTEMpage 29
TUNING RESET
Tuning Reset is the procedure where the module
calibrate its 4 Voices to the 1v/octave standard.
This procedure will overwrite the User’s Fine-Tuning
settings but will not save itself to the non-volatile
memory, so it won’t affect the User’s previously saved
settings if he restarts his system.
If it’s the User’s wish to save the calibration results he
can do so as described in EX.VII - part D.
To execute this procedure Press and Hold the SET KEY
button for 5 seconds.
ADDAC207 INTUITIVE QUANTIZER USER’S GUIDE
April.2021Revision.05
To Next Page
Loading...