Addictive audio 50.1D - Specifications; Common Design Features

2
Specifications
50.1D (13.8V) SINGLE STRAPPED
Signal to Noise Ratio >95dB
90% Efficiency THD: <0.5%
Lowest Recommended Load 1ohm
240 watts RMS @ 4ohm Mono
435 watts RMS @ 2ohm Mono
695 watts RMS @ 1ohm Mono
860 watts RMS @ 4ohm Mono
1340 watts RMS @ 2ohm Mono
Not stable to 1ohm strapped
100.1D (13.8V) SINGLE STRAPPED
Signal to Noise Ratio >95dB
90% Efficiency THD: <0.5%
Lowest Recommended Load 1ohm
480 watts RMS @ 4ohm Mono
840 watts RMS @ 2ohm Mono
1260 watts RMS @ 1ohm Mono
1660 watts RMS @ 4ohm Mono
2440 watts RMS @ 2ohm Mono
Not stable at 1ohm strapped
200.1D (13.8V) SINGLE STRAPPED
Signal to Noise Ratio >95dB
90% Efficiency THD: <0.5%
Lowest Recommended Load 1ohm
800 watts RMS @ 4ohm Mono
1385 watts RMS @ 2ohm Mono
2190 watts RMS @ 1ohm Mono
2640 watts RMS @ 4ohm Mono
4320 watts RMS @ 2ohm Mono
Not stable to 1ohm strapped
_______________________________________________________
Common Design Features
9 EASY CLICK Selectable Center Point Frequency (20-85Hz)
Bass Boost up to +12dB (refer to pg. 13 for adjusting this
feature)
9 Clipping Circuit with LED Indicator
9 Short Circuit, Thermal, Low / High / Reverse Voltage
Protection
9 EASY CLICK on all Frequency Adjustments for Simple and
Exact Tuning
9 Heavy Duty Aluminum Heatsink for Max. Heat Dissipation
9 Input Sensitivity: 220mV – 6.6Vrms
9 Class D High Efficiency (90%) Design
9 Selectable Status Light ( White or Blue or Off )
9 EASY CLICK Low Pass Filter: 50 – 250Hz (24dB/Octave)
9 EASY CLICK Subsonic Filter: 10 – 55Hz (24dB/Octave)
9 Frequency Response -3dB 15Hz – 238Hz
9 All Models STRAPPABLE with the provided Data Link Cable
(Refer to Fig. 6)
9 Laser Etched Logo (Not another Peel-n-Stick amp)
9 Remote Gain Control Included
9 Designed & Engineered in the U.S.A.