ADE BE 1817 - Cleaning; Fault;Remedy

Cleaning
19
Digital baby scale BE 1817
English
Cleaning
NOTE on material damage
− Do not immerse the scales in water or other liquids.
− Do not under any circumstances use harsh, scraping, or abrasive
cleaning agents or the like to clean the scales. If you do, the surface
could be scratched.
− Wipe down the scales as needed using a lightly dampened, soft cloth.
− Disinfect the weighing surface from time to time using a suitable disinfecting
agent (available at specialist retailers and pharmacies).
Fault/Remedy
Fault Possible Cause
No function  Battery empty or inserted the wrong way
around?
The scales appear to be displaying
false weighing results
 Are the scales standing on a rm, even
surface?
 Is a device that can cause electromagnetic
disturbances located in the vicinity of the
scales?
 Remove the battery from the scales and wait
a moment. Reinsert the battery.
“O-Ld” is shown on the display  The maximum capacity of the scales (20 kg)
has been exceeded.
“LO” is shown on the display  The batteries are empty
(see “Inserting/changing batteries”).
“UnSt” is shown on the display  The scale was unstable during the
measurement. Check the base of the scale
and repeat the weighing.
“- - - -” is shown on the display  The scale is not ready or is positioned
incorrectly. Reposition the scale.