ADE Karizma - User Manual

Steps for wiring the CPU, remote keypad, speaker, and applying power.

Details on wiring the mains supply using 3 core cable and a fuse.

Final testing, demonstration to the end user, and documentation.

Explanation of different user codes (Engineer, User, Manager, Cleaner, Duress).

How security point functions change with programs (Final exit, Entry/exit inhibited, Immediate).

Available setting modes: Timed, Terminated, Final Door.

Procedure for resetting NVM to factory defaults via power and link.

Functions for testing alarm outputs like bell, strobe, and sounder.

Additional tests including walktest, soak test, and iD line data display.

Tests for communicator outputs like Fire, PA, Intruder, Set, Tamper, Low Battery.

Programming point types and attributes (normally closed, omit, cleaner access, etc.).

Setting up programs for points, exit modes, and local alarm flags.

Procedure for changing the engineer code.

Setting system timers like Exit Time, Entry Time, Bell Time, Bell Delay.

Setting the type of an iD point (Security, PA, 24 Hour, Fire, etc.).

Configuring points for specific programs (Immediate, Entry/exit inhibited, Final exit).

Setting various system flags affecting alarm behavior and reset.

Setting attributes like Normally Closed, Double Knock, Permit Omit, Cleaner Access, Group Point.

Setting exit modes for programs (Timed Exit, Terminate to Set, Final Door Set).

List of alarm test functions available from the 'Eng' prompt.

List of extra test functions available from the 'Eng' prompt.

List of communicator test functions available from the 'Eng' prompt.

List of system timer settings available from the 'Eng' prompt.

List of point programming options available from the 'Eng' prompt.

List of program setup options available from the 'Eng' prompt.

Function to change the engineer code.

List of system flag settings available from the 'Eng' prompt.

List of miscellaneous options available from the 'Eng' prompt.

Writing system NVM contents to an NVM chip in socket K12.

Getting NVM chip contents from socket into the system NVM.

Steps for wiring the CPU, remote keypad, speaker, and applying power.

Details on wiring the mains supply using 3 core cable and a fuse.

Final testing, demonstration to the end user, and documentation.

Explanation of different user codes (Engineer, User, Manager, Cleaner, Duress).

How security point functions change with programs (Final exit, Entry/exit inhibited, Immediate).

Available setting modes: Timed, Terminated, Final Door.

Procedure for resetting NVM to factory defaults via power and link.

Functions for testing alarm outputs like bell, strobe, and sounder.

Additional tests including walktest, soak test, and iD line data display.

Tests for communicator outputs like Fire, PA, Intruder, Set, Tamper, Low Battery.

Programming point types and attributes (normally closed, omit, cleaner access, etc.).

Setting up programs for points, exit modes, and local alarm flags.

Procedure for changing the engineer code.

Setting system timers like Exit Time, Entry Time, Bell Time, Bell Delay.

Setting the type of an iD point (Security, PA, 24 Hour, Fire, etc.).

Configuring points for specific programs (Immediate, Entry/exit inhibited, Final exit).

Setting various system flags affecting alarm behavior and reset.

Setting attributes like Normally Closed, Double Knock, Permit Omit, Cleaner Access, Group Point.

Setting exit modes for programs (Timed Exit, Terminate to Set, Final Door Set).

List of alarm test functions available from the 'Eng' prompt.

List of extra test functions available from the 'Eng' prompt.

List of communicator test functions available from the 'Eng' prompt.

List of system timer settings available from the 'Eng' prompt.

List of point programming options available from the 'Eng' prompt.

List of program setup options available from the 'Eng' prompt.

Function to change the engineer code.

List of system flag settings available from the 'Eng' prompt.

List of miscellaneous options available from the 'Eng' prompt.

Writing system NVM contents to an NVM chip in socket K12.

Getting NVM chip contents from socket into the system NVM.