Features
¨
Self contained sounder & strobe unit
¨
6 volt rechargeable Ni-Cad battery
¨ 115db @ 1m
¨ High volume piezo driven sounder
¨ Twin status indicators
¨ Battery charge indicator
¨
Adjustable dual fail-safe cut-off timer
¨
Cover and wall anti-tamper protection
¨
Polycarbonate housing
¨
Blue prismatic strobe lens
These instructions cover the installation of Reson8 W/B -
white and blue unit (bell box), which is a self-contained
external sounder and strobe. The unit is suitable for wall
mounting externally and can be connected to any intruder
control panel. The dummy bell box has no functionality.
Technical Data
Operating voltage 10 - 15Vdc
Internal battery 6V Ni-Cd 280mAh
rechargeable
Quiescent current 50mA includes battery charge
current
Flash rate 80 - 140 per minute
Flash current 120mA at 12V
Sounder Output 115dB at 1m
Sounder current 240mA at 12V
Timer Test (5 seconds)
5, 10 and 20 minutes
Dimensions Height 291mm, Width 268mm,
Depth 69mm
Weight
Bell box
Dummy box
0.9kg
0.68kg
Housing
Lens
White Polycarbonate
Blue Polycarbonate
Part numbers Reson8 (White & Blue) - 8EP420
Reson8 (White & Blue) Dummy
box -8EP425
4188-831 issue 1_2/05_reson8 1
Installation instructions
Reson8 Bell Box
8EP420 (W/B) 8EP425 (W/B Dummy bell box)
Top keyhole fixing
Lid tamper and
wall tamper (not visible)
Links to set
Sounder duration
Link to select
continuous or
alternating status
LED indication
Bottom fixing
Bottom fixing
Presence of Hold off supply
Tamper healthy
Battery being charged
6V Ni-Cd Battery
280mAh
Strobe tube
Sounder
LED1
LED1
Link to enable (On) /
disable (Off) the battery
On Off
Battery
LED2
LED3
A
L
T
C
O
N
LEDs
J2
J1
(Red LED Indicator)
(Green LED Indicator)
(Red LED Indicator)
J6
J5
J3
J4
Test
20 minutes
5 minutes
10 minutes
TIMER SETTINGS
To Next Page
Need help?
General
