ADE M118000 - Technical Data

Seite 34 von 112 M118000+M118000-01-210305-Rev002-UM-en
9. Technical Data
Power
supply
Mains operation:
Use only with
m
ains
a
dapter UES06WOCP
-
060100SPA
Mains voltage: 100 – 240 V AC, 0.2A
Frequency:
50/60 Hz
Supply Voltage
:
6 V DC
Current: 1.0 A (max.)
Battery operation: 4 x 1.5 V AA alkaline batteries
(> 5000 measurements / >100 h operating time)
"Weight“ Measuring
range
Single Range
Dual Range
Max. load capacity:
15 kg
20 kg
Division:
5 g
5 g < 10 kg > 10g
Accuracy:
0
≤ 2,500 kg:
±5g
0
≤ 2,500 kg:
±5g
2,505 ≤ 10,000 kg: ±10g 2,505 ≤ 10,000 kg: ±10g
10,010
≤ 15,000 kg:
±15g
10,010
≤ 20,000 kg:
±20g
"Length“
Measuring range
Measuring Range:
39,8 – 80,2 cm
Division:
0,2 cm
Accuracy:
±0,4 cm
Ambient conditions
Operating temperature:
+10°C to
+4
0
°C
Storage and Transport
temperature:
-20°C to +60°C
Humidity: 10% - 95% RH, non-condensing
Air pressure:
7
00 hPa
-
1060 hPa
Device classification
The combination of scale and adapter are specified as ME System. Adapter
is considered as
non
-
ME
equipment
part of ME S
ystem
.
Mode of operation: Continuous operation
Degree of protection:
Type BF applied part (scale top surface)
Battery mode:
Internally powered ME equipment
AC adapter mode:
Class II ME equipment
Software
The software version is displayed when the scale is switched on.
Wireless:
Frequency:
2402 MHz to 2483.5 MHz
Transmission power: +4 dbm
Range:
10 metres
Housing
Dimensions: 610 x 390 x 140 mm
655-1055 x 390 x 140 mm
without length measuring system
with length measuring system
Net weight:
3,5 kg / 3,7 kg
without / with length measuring system
Material: ABS plastic
Protection class: IP21; the device is protected against solid foreign objects with a diameter of
≥ 12.5 mm. Protected against vertically falling drops of water or
condensation.
Service life:
The design provides you with a service lifetime of 8 years.