Inserting/changing batteries
For use you require 2 batteries of type
LR03 (AAA), 1.5 V (included).
1. Open the battery compartment on the rear
side.
2. Insert the batteries as shown on the base of
the battery compartment. Pay attention to
the correct polarity (+/-).
3. Close the battery compartment again.
Suggestions for changing the battery:
Battery change is necessary if the display
shows either a battery symbol
or nothing
at all.
Only use the type of battery that is specified
in the “Technical Data”.
Always exchange all of the batteries at the
same time.
Dispose of batteries in an environmentally
appropriate way (see “Disposal”).
As soon as the device is powered, a beep will
sound. Shortly thereafter, the display will show
the following values:
Indoor temperature
Humidity
Comfort indicator
To Next Page
Loading...
