6. Use UP or DOWN to set the desired alarm
minute.
7. Press MODE repeatedly until the display
shows the set time.
The procedure has been completed.
Switching the alarm function on/off
− Using the UP button, turn the alarm function
on and o.
As soon as the alarm symbol
appears on the
display next to the time, the alarm function will
be enabled.
Being awakened
At the set time, you will be woken by an alarm
signal, which will become more intense as the
waking time increases.
Switching the alarm off completely
− Press any button (except SNZ) to stop the
alarm. After 24 hours, the alarm will be
triggered again.
Auto-stop function
If you do not press a button, the alarm switches
off automatically after 2 minutes. After 24 hours,
the alarm will be triggered again.
To Next Page
Loading...
