ADE WS 2136-2 - Alarm

12
Weather Station with Wireless Outdoor Sensor WS 2136-x
Alarm
Setting the alarm time
1. Press SET once briefly.
The display will show a time and AL.
2. Press and hold down SET for a few seconds until
the alarm hour indicator flashes.
3. Using the + and – buttons, set the desired alarm
hour. The alarm symbol
will automatically be
shown on the display. It indicates that the alarm
function is enabled.
If you press and hold the + or –buttons,
the displayed values will be increased or
decreased more quickly.
4. Press SET.
The minute indicator for the alarm time blinks on
the display.
5. Using the + and – buttons, set the desired alarm
minute.
6. Press SET.
Use the + or – buttons to set the desired SNOOZE
time (pause between two repeat alarms). If you
select OFF, the SNOOZE function is deactivated
7. Finally, press SET.
In a few moments, the display will return to normal
time.
Kurzanleitungen WS 2136-x DE EN FR.indb 12Kurzanleitungen WS 2136-x DE EN FR.indb 12 27.10.2021 10:54:2827.10.2021 10:54:28