Adel Trinity 788 - Enrollment of member fingerprints

Trinity 788 Operation Manual
Trinity 788 Operation Manual
Notes:
1. If the buzzer makes two short beeps, and the red indicator light flashes, the setup fails;
2. Each lock can only set 3 master fingerprints with code 00-02 , and the master fingerprints
can delete each other, open the door, setup passage mode, as well as authorize and setup or
delete the member fingerprints and spare password;
3. After successful enrollment of the first master fingerprint, continue operation while the LED
displays 0- to enroll other fingerprints needed; or else the LED will stop display two
seconds later;
4. When inputting fingerprint code, you can press Button to cancel current operation and
re-input, or press Button during operation to exit setup state;
5. Refer to Notes of Right method to apply fingerprint (P 02) for operation .
Enrollment of member fingerprints (take user 03 as an example)
Operational procedure
Indication of the lock
Put the master finger that has been enrolled on
the fingerprint window and enter door open state
Green light is on, and the LED displays
the code of the master fingerprint
Press Button + to enter the enrollment mode
A beep sound heard, and the LED displays 0-
Press Button + or - to adjust the first digit
0 of the fingerprint code, and press Button
# to confirm the choice.
The figure just set jumps to the tens place,
and the ones place displays 0
Continue to press Button + or - to adjust
the second digit 3 of the fingerprint code,
and press Button # to confirm
The LED displays the fingerprint code 03 and
flashes alternately.
Press Button # to reconfirm
the fingerprint code 03
The LED displays fingerprint code 03 with
the red light on the fingerprint window is on
Put the finger to be enrolled on the fingerprint
collection window, and collect twice
When the red light of the fingerprint window is on,
press with the finger; after the beep, remove the
finger and press one more time. A long beep will sound
and the two collections are successfully completed
Member fingerprint 03 is enrolled
Continue to set other fingerprints while the LED
displays 0- ; or else the display will stop
two seconds later, with green lights turn off.
09 10
*
*