EasyManua.ls Logo

Adel Trinity 788 - Deletion of fingerprints

Adel Trinity 788
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Notes:
1. The original password of the new lock (factory setting) is 111111 , and this original
password will be cleared at the time of the successfully enrollment of the master fingerprint
2. The spare password must be of 6 digits, which is an arbitrary combination of the figures 0~9 ;
3. Only one spare password can be set for each lock, and with the code 99 . The spare
password is the only password that can open the door, you can change it and delete it;
please refer to P.15 for deletion of password;
4. During the setting, the confirmed figure will be moved automatically to the tens place of the
LED, with the figure to choose and confirm at the ones place;
Trinity 788 Operation Manual
Trinity 788 Operation Manual
V. Deletion of fingerprints (take user 03 as an example)
Operational procedure
Indication of the lock
Put the master finger that has been enrolled
on the fingerprint window and enter door open state
Press Button - to enter the deletion mode
Green light is on,
and the LED displays the code of the master fingerprint
The LED displays 0-
Press Button + or - to choose the first
digit 0 of the password code, and press
Button # to confirm the choice
The LED displays the figure 0 just set which jumps
to the tens place, and the ones place displays 0
Continue to press Button + or -
to adjust the seconddigit 3 of the
fingerprint code,and press Button # to confirm
The LED displays the fingerprint code 03 and
flashes alternately.
Press Button # to reconfirm the fingerprint
code to be deleted, and the deletion of
the member fingerprint is completed
The light on the fingerprint window flash one time
with a relatively sharp and quick beep, the LED
displays 0- and stops display two seconds later
Notes:
1. Continue to input fingerprint code while the LED displays 0- , and repeat the operation for
deletion of other fingerprint;
2. The fingerprint codes 00-02 are master fingerprints, while 03-98 are member fingerprints;
3. The deletion of the member fingerprint can only be completed when its fingerprint code is available.
13 14

Related product manuals