ADEMCO 20SE User Manual

VISTA-20 SE
2-PARTITIONED
SECURITY SYSTEM
PROGRAMMING
FORM
®
Principal changes between the VISTA-20SE and
the former VISTA-20 are indicated by margin lines.
VISTA-20PRV4 8/97 (See Instructions N7526V4)
Previous Menu
Features Q.E.D. programming for quick
enrollment of devices.

ADEMCO 20SE Specifications

General

Brand	ADEMCO
Model	20SE
Category	Security System
Language	English

Summary

System Setup Configuration

Installer Code

Sets the 4-digit installer code for system programming access.

Zone Sounds and Timing Settings

Exit Delay Time

Configures the delay time for exiting the premises after arming.

Entry Delay 1 (Zone Type 01)

Sets the first entry delay time for specific zone types.

Additional Entry Delay and System Options

Entry Delay 2 (Zone Type 02)

Sets the second entry delay time for specific zone types.

Dialer Programming and Account Setup

Primary Phone Number

Enters the primary phone number for alarm reporting.

Secondary Phone Number

Enters the secondary phone number for alarm reporting.

Primary Subscriber Account Number (Partition 1)

Sets the account number for the primary phone line, partition 1.

Secondary Subscriber Account Number (Partition 1)

Sets the account number for the secondary phone line, partition 1.

Primary Subscriber Account Number (Partition 2)

Sets the account number for the primary phone line, partition 2.

Secondary Subscriber Account Number (Partition 2)

Sets the account number for the secondary phone line, partition 2.

Report Format Selection

Selects the reporting format for alarm transmissions.

Zone Assignment and Alarm Report Codes

Zone Number (Zn)

Assigns a unique number to each zone.

Zone Type (ZT)

Defines the operational characteristics of each zone.

Partition Number (P)

Assigns a zone to a specific system partition.

Alarm Report Code (RC)

Sets the specific code transmitted for zone alarms.

Loop Input Type (In)

Specifies the input type for the zone (e.g., wired, RF).

Response Time (RT)

Sets the response time for zone events.

Learned RF Input (L)

System Status and Restore Report Codes

Output and System Setup Options

Output Relays and Powerline Carrier Devices

Configures output relays and powerline carrier devices.

Zone Lists for Output Devices

Defines zone lists to trigger output device actions.

Programming Mode Entry and Exit

Enter Programming Mode

Instructions for entering the system's programming mode.

Exit Programming Mode

Procedures for exiting programming mode and preventing re-entry.