Need help?Do you have a question about the ADEMCO 4111XM and is the answer not in the manual?
General| Compatibility | ADEMCO/Honeywell Security Systems |
|---|---|
| Zones | 8 hardwired zones |
| Keypads Supported | Not applicable |
| Event Log | Not applicable |
| Dimensions | 89mm x 64mm x 25mm |
| Operating Temperature | -40°C to 65°C |
Details on arming modes like STAY, AWAY, INSTANT, MAXIMUM and CHIME mode.
How the OFF key disarms the system, silences alarms, and clears displays.
Function of the AWAY key to arm the entire burglary system.
Function of the STAY key to arm perimeter protection only, allowing interior movement.
Function of the MAXIMUM key for maximum protection without entry delay.
Function of the TEST key to check system and alarm sounder operation.
Function of the BYPASS key to remove zones from monitoring.
Function of the INSTANT key for perimeter arming without entry delay.
Procedure for bypassing specific zones before arming the system.
How to use the STAY key to arm perimeter and allow entry/exit door use.
How to use the INSTANT key to arm perimeter without entry delay.
How to use the AWAY key to arm the entire system with exit delay.
How to use the MAXIMUM key to arm the entire system without entry delay.
Procedure for disarming the system and silencing alarms and trouble sounds.
How to use the TEST key to check system and sensor operation weekly.
Meaning of CHECK and BATTERY displays and how to silence beeping.
What to do if there's no console display or "AC LOSS" message.
Procedure to arm the system in various modes using the security code.
Procedure to bypass individual zones before arming.
Procedure to silence sounders for burglary and fire alarms.
Procedure to determine the cause of a CHECK display.
Procedure to disarm the system and clear the display.
How to turn test mode on to check system and sensor operation.
To Next Page
