P~RS fiouble~estore Reports:
In the event that a BFSK mmmmi mt or re-
ports a POPEX fafiure, the No. 685 will generate the following high speed
m-sage:
.-
Printout:
(T~ & DATE) 13 0123 5505 5555 6
(v)
SYS~M FA~ORE
Display: 13 0123 5505 5555 6
(TI~ & DATE)
Note that code O is used to indicate a new trouble in this case and appeara
in the channel 3 position, thus indicating a system failure, which appears
in the printout above.
A restoral will produce the follming massage:
Printout: (TINS & DAm) 13 01235535 5555 6
Display:
(V) SYSTEM FAUURE HSSTORE
13 0123 5535 5555 6
(TI~ & DATS)
Tdco C-unimtion -d Trouble Reports:
A trouble reprt in tele~one
comuni cation during a test repoti call will generate the following high
speed message:
Printout:
(TN & DATE) 13 012355550555 6
(v)
CONN. CHAN. TROUSLS
Display: 13 0123 5555 0555 6
(v)
(TINS & DA~)
Note that code O (New Trouble) and not code 1 (New Event) is used in the
channel 5 position, beauae the trouble is not related to Long Range Radio
(a trouble in that area wo~d use code 1 in the channel 5 position). This
is clarified in Table B (see explanatory notes at foot of table in con-
nection with the use of codes 1 and O).
Restoral reports are not sent in this case.
Unsuccessfti/SnccessftiDtioad or Paer-on Reset Wouble Reports: An un-
successf@ dowfload or a power-on reset trouble will generate the following
hi@ speed message:
Printout:
(TI~ & DATK) 13 0123 5550 5555 6
(v)
P~4N RESET TROUBLE
Display: 13 0123 5550 5555 6
(TIME & DATE)
Note that the KnQish language message in the printout will be the same for
either re~rt (Unsuccessfti download or power-on reset trouble), and t~t
code O (New Trouble) not mde 1 is used in the channel 4 position (a code 1
in chanel 4 position wo~d be related to a Long Range Radio problem).
A successfti dowtioad or ~wer-on reset restor~ will produce the following
m-sage:
Printout: (TI~ & DA~) 13 0123 5553 5555 6 (v)
PW+N RESET RESTORE
Display: 13 0123 5553 5555 6 (TI~ & DA~)
E.
x- Messages: (also see
Section XI, COWUTER INTERFA~)
1. R~A Group Ueas~ (Peri@erd Device Fti~estore):
w
An R~A Group message (fomat simfiar to ~GH SP~D ) will appaar if a
trouble develow in any of the peripheral devices (computer, printer, _
AC pmer, battcry). A fafiure w=l be indicated by a ‘1‘ in the cor-
responding ~sition, while a restord will k indicated by a t31 in
the corraapending channel position. The ACmUm NU~ER will be R~A.
28
www.PDF-Zoo.com
To Next Page
Loading...
